Wet & Dry Waste Smart Dustbin for House | Best science Project | Harish Projects

-
Image
 Watch Full Detailed video 👇🏻 Diagram in Video👆 //Arduino Code// //YouTube: Harish Projects //Order Electronic Parts & Project kit:  HarishProjects.com // #include <Servo.h> Servo servo1; const int trigPin = 12; const int echoPin = 11; long duration; int distance=0; int potPin = A0; //input pin int soil=0; int fsoil; void setup()  {   Serial.begin(9600); //Serial.print("Humidity"); pinMode(trigPin, OUTPUT);  pinMode(echoPin, INPUT);  servo1.attach(8); } void loop()  { //YouTube: Harish Projects //Order Electronic Parts & Project kit:  HarishProjects.com //      int soil=0;   for(int i=0;i<2;i++)   { digitalWrite(trigPin, LOW); delayMicroseconds(7); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); delayMicroseconds(10); duration = pulseIn(echoPin, HIGH); distance= duration*0.034/2+distance; delay(10);   }   distance=distance/2;   Serial.println(distance); if (distance <20 && distance>1) {   delay(1000); for(int i
4 comments

Inspire Award Project | Automatic Zebra crossing Project | Best school science Project | Harish Projects

-


 

Click here to watch making video, -  https://www.youtube.com/watch?v=eX9nqYEnGR8&t=17s

//Arduino Code//

#include <Servo.h> //import library

Servo myservo; 

int led = 13;

Servo myservo1;   

int led1 = 12;

void setup() 

{ 

pinMode(led, OUTPUT); 


   myservo.attach(9, 500, 2500);   


  pinMode(led1, OUTPUT);


  myservo1.attach(10, 500, 2500);

} 

void loop() 

{ 

    // Rotate Servo 3 by 180 degree

  myservo.write(90);

  myservo1.write(0);

  delay(10); 

 digitalWrite(led, HIGH);   

  delay(8000);              

  digitalWrite(led, LOW);  

  myservo.write(0);

  myservo1.write(0);

  delay(1000); 

  myservo.write(0);

  myservo1.write(90);

  delay(10); 

   digitalWrite(led1, HIGH);   

  delay(8000);               

  digitalWrite(led1, LOW);    

  myservo.write(0);

  myservo1.write(0);

  delay(1000); 

  //

}


//Project Diagram//




Comments

Unknown said…
Battery cnnection kaise bro
April 26, 2022 at 2:24 AM
Unknown said…
Battery connection
April 26, 2022 at 2:25 AM
Unknown said…
Red light kaise jalegi
July 20, 2022 at 5:35 PM
Unknown said…
Coding is wrong. It doesn't compile
July 20, 2022 at 6:27 PM
Unknown said…
Bhai adapter use kar aur electric board mai laga
November 15, 2022 at 4:30 AM
sai kiran said…
bro code ing is not working
January 4, 2023 at 9:39 PM
Jyoti said…
This comment has been removed by the author.
May 21, 2023 at 11:18 AM
Jyoti said…
Can u please provide the complete code. please
May 21, 2023 at 11:21 AM
Ritesh said…
Bhai code de do yaar please
June 14, 2023 at 4:08 AM
Priya dubey said…
Please warking your code
Please code send kar do
Please please please
😭😭😭
June 15, 2023 at 7:38 AM
Shad Habib said…
The code you provided seems to have some inconsistencies and redundant lines. Here's the fixed version of the code:

#include // Import library

Servo myservo;
int led = 13;

Servo myservo1;
int led1 = 12;

void setup()
{
pinMode(led, OUTPUT);
myservo.attach(9); // Attach servo to pin 9

pinMode(led1, OUTPUT);
myservo1.attach(10); // Attach servo to pin 10
}

void loop()
{
// Rotate Servo 1 by 90 degrees
myservo.write(90);
delay(10);

digitalWrite(led, HIGH);
delay(8000);
digitalWrite(led, LOW);

myservo.write(0);
delay(1000);

// Rotate Servo 2 by 90 degrees
myservo1.write(90);
delay(10);

digitalWrite(led1, HIGH);
delay(8000);
digitalWrite(led1, LOW);

myservo1.write(0);
delay(1000);
}

In this fixed code, I have removed the unnecessary parameters from the attach() function for the servos since the default values will work fine. I have also removed the redundant lines where the servos were set to 0 degrees before starting the loop.

Please make sure to connect the servos to the correct pins (pin 9 and pin 10 in this example) and the LEDs to the respective pins (pin 13 and pin 12 in this example). Upload this code to your Arduino Uno and test it with your hardware setup.
June 27, 2023 at 7:22 AM
Anand said…
Bhai Gear Motor ko Arduino UNO ke sath connect karne ke liye coding banakar bhej dijiye.
August 28, 2023 at 7:02 AM
Post a Comment

Popular posts from this blog

Smart Bridge - Automatic Hight increase when flooding | Best science Project

-
Image
  Watch video on YouTube. //Arduino Code// //Code by Harish Projects //Orde science projects kit & electronics parts from "HarishProjects.com" #include <Servo.h> //Install this library Servo tap_servo; int sensor_pin = 5 ;   //Connect D5 of Arduino int tap_servo_pin = 4 ; //Connect D4 of Arduino int val; void setup (){   pinMode (sensor_pin,INPUT);   tap_servo . attach (tap_servo_pin);   } void loop (){   val = digitalRead (sensor_pin);   if (val== 0 )   { tap_servo . write ( 0 );   }   if (val== 1 )   { tap_servo . write ( 90 ); //If you want you can increase & Decrease servo rotation     } } //Project Diagram 1 // //Project Diagram 2// Contact us for support -  https://www.instagram.com/harishchoudhary70/
Read more

How to make Phone control RC car using Arduino #phoneControlCar

-
Image
                                     https://www.youtube.com/watch?v=EYlIB1PQ8R0&t=131s                                                    ......................ARDUINO CODE................. char t ; void setup () { pinMode ( 13 , OUTPUT ); //left motors forward pinMode ( 12 , OUTPUT ); //left motors reverse pinMode ( 11 , OUTPUT ); //right motors forward pinMode ( 10 , OUTPUT ); //right motors reverse pinMode ( 9 , OUTPUT ); //Led Serial . begin ( 9600 ); } void loop () { if ( Serial . available ()){ t = Serial . read (); Serial . println ( t ); } if ( t == 'F' ){ //move forward(all motors rotate in forward direction) digitalWrite ( 13 , HIGH ); digitalWrite ( 11 , HIGH ); } else if ( t == 'B' ){ //move reverse (all motors rotate in reverse direction) digitalWrite ( 12 , HIGH ); digitalWrite ( 10 , HIGH ); } else if ( t == 'L' ){ //turn right (left side motor
Read more

Inspire Award Project | Train accident Prevention project | Best science Project / Harish Projects

-
Image
 Full Making video Link -  https://youtu.be/nz6UnFjr__g //Arduino Code// const int trigPin = 12 ; const int echoPin = 13 ; const int LED1 = A0 ; const int LED2 = A1 ; const int LED3 = A2 ; const int LED4 = A3 ; const int LED5 = A4 ; const int LED6 = A5 ; const int LED7 = 2 ; int duration = 0 ; int distance = 0 ; void setup () { pinMode ( trigPin , OUTPUT ); pinMode ( echoPin , INPUT ); pinMode ( LED1 , OUTPUT ); pinMode ( LED2 , OUTPUT ); pinMode ( LED3 , OUTPUT ); pinMode ( LED4 , OUTPUT ); pinMode ( LED5 , OUTPUT ); pinMode ( LED6 , OUTPUT ); pinMode ( LED7 , OUTPUT ); Serial . begin ( 9600 ); } void loop () { digitalWrite ( trigPin , LOW ); delayMicroseconds ( 2 ); digitalWrite ( trigPin , HIGH ); delayMicroseconds ( 10 ); digitalWrite ( trigPin , LOW ); duration = pulseIn ( echoPin , HIGH ); distance = duration / 58.2 ; if ( dist
Read more